Regional operations: The permit rule is present but traffic fails
The incident
Operations collectors reach polling and trap-receiver networks over three routed transport stages. Two small routed rings share a regional interchange; the service sits beyond the second ring. Route checks and ICMP succeed. The primary service transport fails even though an allow rule appears in the service access list. Investigate monitoring transport from R1: 10.170.96.0/24 to 10.170.106.0/24 (UDP/161), and 10.170.97.0/24 to 10.170.107.0/24 (UDP/162).
Your objective
Restore both authorized service transports and return reachability, including clients and service hosts in both halves of the primary subnet. Keep R2 blocked from both service transports, keep SSH blocked to both service subnets, and preserve monitoring between R1 and R4. Do not change physical topology or addressing. These are network forwarding checks, not application-level transactions.
The network
Link addressing (7)
- R1 R2
10.170.112.0/30 - R2 R3
10.170.113.0/30 - R3 R1
10.170.114.0/30 - R3 R4
10.170.115.0/30 - R4 R5
10.170.116.0/30 - R5 R3
10.170.117.0/30 - R5 R6
10.170.118.0/30
What you’ll practice
Interview exercises are inspired by common industry competencies. They are not proprietary interview questions.